xallenx
New member
- Joined
- Sep 1, 2003
- Location
- Charleston, SC
So, I posted before that I have a high crankcase pressure even after replacing my oil separator and hose. The pressure is so high that it blew the intermediate seal off. I took off the new oil separator and stuck a hanger in the oil sump pipe. I can only get down to about 1.5 inches with the hanger. The pipe is clogged up. How do I go by unclogging this pipe? Should hammer a rod and push all the crud into the sump? Any advice.
http://www.volvoclub.org.uk/faq/ImagesProcedures/OilBreatherBox2.gif
The hole on the left is clogged.
http://www.volvoclub.org.uk/faq/ImagesProcedures/OilBreatherBox2.gif
The hole on the left is clogged.