Thread: seafoam
View Single Post
Old 02-25-2012, 02:05 AM   #7
weak-sauce
Board Member
 
weak-sauce's Avatar
 
Join Date: Jan 2012
Default

sounds good.

Quote:
Originally Posted by BryantTF242 View Post
i would say do it, put 1/3 in the tank, 1/3 in the oil, and suck up the other 1/3 into a manifold vacuum line that feeds all cylinders, but do that part very slowly little by little, too much at once and you can hydrolock your engine. after you have completed sucking it into the manifold, have someone in car give it a rev and then turn off the car, let it sit for 10 minutes or so to let the solution soak the valves and the cylinder bore, start it up, take it for a ride for a good 10 min cycling through 1-4000 rpm and your set
weak-sauce is offline   Reply With Quote