Turbobricks Forums - View Single Post

Dirty Rick · 11-22-2020, 03:41 PM

There is a topic here with someone who ran boost with a Regina system.

But for a MS you will need to look at what is available for a crank signal and how the MS can be configured to work with that.
Idle speed control is the next tricky business, the rest is fairly basic.

Hopefully a guru will chime in and provide specifics, if not we can step through it one bit at a time.

I'd recommend a MS2 - v3 Main Board over a MicroSquirt as it is more versitile and has more features.
A MicroSquirt is not a MS2, it uses a minimalist subset of the MS2 features.

Really need to know what hardware you have to start with and your goals, in order to give you a better picture of how to convert it.

11-22-2020, 03:41 PM	#2
Dirty Rick Board Member Join Date: Apr 2013 Location: Cornholio, OR	There is a topic here with someone who ran boost with a Regina system. But for a MS you will need to look at what is available for a crank signal and how the MS can be configured to work with that. Idle speed control is the next tricky business, the rest is fairly basic. Hopefully a guru will chime in and provide specifics, if not we can step through it one bit at a time. I'd recommend a MS2 - v3 Main Board over a MicroSquirt as it is more versitile and has more features. A MicroSquirt is not a MS2, it uses a minimalist subset of the MS2 features. Really need to know what hardware you have to start with and your goals, in order to give you a better picture of how to convert it. __________________ I don't know who I am when I am somebody else.