View Single Post
Old 05-19-2009, 08:21 AM   #113
Xman
Board Member
 
Xman's Avatar
 
Join Date: Dec 2005
Location: Fort Worth TX
Default

Check post number 81 in this thread. It details some of the issues I ran into with my conversion that were not covered elsewhere on the forum. I turned my waste gate down so that it wasn't flush against the seat (riding partially open) and I was still too lean with stock. Also, there is an option to use a aftermarket cone filter which should be better than trying to run a tube over the engine. I didn't find any issues with running the AMM harness to the passenger side so long as I maintained ground.
__________________
Displacement or Boost - Why Not Have Both!! '04 GTO 5.7L w/ 6sp, '93 245T, '60 MGA, '11 Honda Pilot (family hauler)
Xman is offline   Reply With Quote