dman535
New member
- Joined
- May 11, 2008
- Location
- Nashville, TN
Most of the clips on my factory airbox are missing with broken shards of plastic where they used to mount. Any tips or tricks on sealing the airbox lid with the missing clips ?
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
IME, every RWD Volvo I"ve tried that↑ on has lost power, mostly torque; turbo or NA. Stock air box has proven superior every time.
IME, every RWD Volvo I"ve tried that↑ on has lost power, mostly torque; turbo or NA. Stock air box has proven superior every time.
I did something similar with my wife's 760. I used knockout blanks from a new breaker box that I installed in a house. I made two small cuts and bent up little tabs, drilled each tab to accept the spring clip, and pop riveted them to the box. Worked really well. I'll try to get a pic tomorrow if anybody wants to see it.