View Single Post
Old 10-20-2013, 12:15 PM   #6
AdmiralSenn
Board Member
 
Join Date: Jan 2007
Location: Vero Beach
Default

Actually, the person you should be talking to is John Lane (username here is JohnLane). He can probably tell you anything you want to know off the top of his head.

That being said, if you're making a set or multiple sets of liners and pistons, you might want to start with an existing set either new or from a used motor. Nothing beats having the part in your hand to measure off.
AdmiralSenn is offline   Reply With Quote