View Single Post
Old 10-20-2013, 12:41 PM   #7
Join Date: Oct 2013
Location: Buenos Aires, Argentina

Originally Posted by AdmiralSenn View Post
Actually, the person you should be talking to is John Lane (username here is JohnLane). He can probably tell you anything you want to know off the top of his head.

That being said, if you're making a set or multiple sets of liners and pistons, you might want to start with an existing set either new or from a used motor. Nothing beats having the part in your hand to measure off.
Yes, the idea is to make several of these.
I have a used spare set for a PRV engine bore 93mm.I have already made six liners according to this set i have.It would be great if they can fit the B280 as well.
Jorge_ is offline   Reply With Quote