View Single Post
Old 01-23-2011, 02:16 PM   #23
JW240
All idiot, no savant
 
JW240's Avatar
 
Join Date: Aug 2004
Location: The Netherlands, Europe
Default

Quote:
Originally Posted by sbabbs View Post
Start programming half way into the chip at 8000 and 512 chips will work....
I tried 'chip start' at 0x8000 but no result. Looking at the software (topwin6) later i realised that maybe 'buffer start' at 0x8000 could have worked? Strange thing was that with pin 15 not plugged in but bent away it still didnt work. Also when starting at the normal value (buffer and chip start at 0000) the car didnt want to start with it. the chip didnt give any trouble when writing/reading.
__________________
240 | 1991 | 338K Km | B230F+T | Cosworth T3 60/63 | M90 | TrueTrack
Husaberg FE450 70 degree '12 mx/supermoto swapped


Quote:
Originally Posted by Redwood Chair View Post
Don't forget about properly seasoning it on HF jackstands for a couple years whilst dreaming about big powah 'goals'.
JW240 is offline   Reply With Quote