JimmyMelbs
New member
- Joined
- Jul 19, 2015
Alright gang so I'm a visual guy. Diagrams don't cut it for me or make this easy to comprehend.
Finishing up my wiring and not sure how to hook it up.
I'm using Bosch 2x2 coils and a 203 ignition module.
Have the board and wiring to engine bay and have repinned the new connector for the new ignitor.
I've been advised to keep the old ignitor intact and connected to original heatsink and run power from the original coil which is blue wire on b230ft lh2.4.
Not sure how to take power from the coil or do the relay thing if I even need to.
Can someone help?
If you can explain how you got power and ground from your original coil and what you did with your old ignitor and coil that would be great.
I would preferably like to move or delete the old coil eventually so need to know what I need to do.
Thanks for being patient with me.
Finishing up my wiring and not sure how to hook it up.
I'm using Bosch 2x2 coils and a 203 ignition module.
Have the board and wiring to engine bay and have repinned the new connector for the new ignitor.
I've been advised to keep the old ignitor intact and connected to original heatsink and run power from the original coil which is blue wire on b230ft lh2.4.
Not sure how to take power from the coil or do the relay thing if I even need to.
Can someone help?
If you can explain how you got power and ground from your original coil and what you did with your old ignitor and coil that would be great.
I would preferably like to move or delete the old coil eventually so need to know what I need to do.
Thanks for being patient with me.