77volvo245
Well-known member
- Joined
- Apr 26, 2007
- Location
- Portland Oregon
Turbo shaft has more play than I remembered.
Journal bearing turbos are going to have play with no oil going through it. As long it doesn't have front to back..
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Turbo shaft has more play than I remembered.
Threads in head. Parts from IPD ("stage zero" the turbo motor: gaskets, seals, hoses, belts). $500 more denaros.
Bought another cool part from Harold. Even more denaros.
There must be a 12 step program...
Been working on the garage this week. Sorting dusty boxes labeled "keepsake." So much stuff. Only been in this house about ten years.
Picked up "PVA" primer for the bare drywall and some builder white paint to go over it. Hoping to remove two or three shelving units and have a much brighter work place.
Big push this weekend as the car is in the driveway for the first time in three years.
Ordered a sweet VDO 0-30 boost gauge.
Despite my concerns that I had never heard of a M9x1.25 stud, that's what the pranksters at the machine shop put in my head to replace the damaged M8's. Not having much luck. May take it back and have them go to a different size. Or just swap on the head from my B230... So frustrating.