View Single Post
Old 02-24-2018, 09:55 AM   #175
Andrewhans
Turbo LS ****poster
 
Andrewhans's Avatar
 
Join Date: Jan 2013
Location: Kenly, NC
Default

Quote:
Originally Posted by cosbySweater View Post
Yea it's a nice piece. And works really well
So I'm finding between the sensor($30-35) and the pigtail I'll need to wire it in($20-25) I'm gonna be at the same cost as the AEM 3.5bar brass sensor.

I'm far less worried about the AEM style sensor failing with a 100psi burst pressure rating over the unknown LS9 sensor. I think its also the heat coming off my exhaust that is causeing the sensor to fail. I just don't want the glue to separate on the LS9 like it did on my GM 3 bar.

The AEM will be the sensor Im going with because of cost, style and proximity to a heat source.
__________________

Current setup - Aluminum L33/Summit Turbo Stage 2/Gen 1 Billet 7875, single Walbro 450 and Dual AEM 400's, Bosch 210's
60' 1.51 - 1/8 6.38 @ 110.8mph - 1/4 xxx
3060lb no driver
3240lb with driver
Andrewhans is offline   Reply With Quote