• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

kaplhenke 240 upper offset strut mounts

Position 1
9BdcgMel.jpg


Position 2
PGzXvT2l.jpg


Position 3
K0CYxzjl.jpg
 
One would think for $180 some simple instructions would be included. Go figure.

If only there was a Turbobricker who is employed as a technical writer... Maybe that person could offer their services to create instructions for these parts...

Oh wait...
 
Just for reference there is another position but it requires another hole to be drilled and tapped. If you have the tools you can do it yourself, you can get the particulars from Ben. Or ask nicely before buying if he'll do it for you. This was the only way I could avoid the stock spring from rubbing on the back of the strut tower.

Position Zero

jE4jcUGh.jpg
 
Back
Top