84B23F
Well-known member
- Joined
- Feb 11, 2008
- Location
- Kansas, USA
1990-240
Previous OEM block sender was making temp gauge go up/down, so I replaced it with NOS (New Old Stock) OEM block sender.
Now, temp gauge is rock solid at beginning of red area, with top radiator hose being "flaccid."
Previous Swedish owner maintained vehicle....would removing that resistor cause this behavior? I thought about inserting a resistor at sender's terminal, but not sure about what ohm value is required
I installed new thermostat for NA engine, but I plan to install the "turbo" thermostat, which is lower temp.
Previous OEM block sender was making temp gauge go up/down, so I replaced it with NOS (New Old Stock) OEM block sender.
Now, temp gauge is rock solid at beginning of red area, with top radiator hose being "flaccid."
Previous Swedish owner maintained vehicle....would removing that resistor cause this behavior? I thought about inserting a resistor at sender's terminal, but not sure about what ohm value is required
I installed new thermostat for NA engine, but I plan to install the "turbo" thermostat, which is lower temp.