ZVOLV
<Master Tech>
- Joined
- Nov 19, 2002
- Location
- California
(Runs on starting fluid and NO injector pulse.)
You need to confirm good power, ground and RPM signal to the LH box at this point.
For testing power circuits, USE AN INCANDESCENT TEST LAMP. A meter is the incorrect tool. It can show 12v, but one strand of wire, or a corroded fuse, could pass 12V, but wouldn't pass enough CURRENT to illuminate a test lamp or operate the component
You need to confirm good power, ground and RPM signal to the LH box at this point.
For testing power circuits, USE AN INCANDESCENT TEST LAMP. A meter is the incorrect tool. It can show 12v, but one strand of wire, or a corroded fuse, could pass 12V, but wouldn't pass enough CURRENT to illuminate a test lamp or operate the component