View Single Post
Old 04-22-2019, 01:01 AM   #9
sbabbs
Board Member
 
sbabbs's Avatar
 
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR
Default

If your just putting a stock stuff back in and not racing it should be fine if it cleans up with resurfacing. Problems happen when you try and use ceramic discs and go racing. Make sure you get the top of the dog dish ground down so the gap is within spec between the pressure plate mounting surface and the surface of where the disc rides.
__________________
1988 245 White slicktop M47 Wagon! 2.5L NA 8v going in.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K MILES
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.
sbabbs is offline   Reply With Quote