View Single Post
Old 03-31-2012, 02:45 PM   #141
HansW
Board Member
 
HansW's Avatar
 
Join Date: Jul 2004
Location: Ireland
Default

We'll see if that slips --with your set-up you could easily go the other side of 400 nm torque.
__________________
940 classic Cd 1997
B230FT / M90L
530 head planed, KG 2T cam
Head gasket: Elring standard (Mls 0.35 was too tight, -- piston- head contact),
1041 axle 3.74, M90
15G at 0,85 bar
3" turbo back JT-superflow
3" Amm. + 42lbs injectors
STONI chips in 984 ecu and 167 EZK
Bosch WR5 DC+ (+15)
HansW is offline   Reply With Quote