• Hello Guest, welcome to the initial stages of our new platform!
    You can find some additional information about where we are in the process of migrating the board and setting up our new software here

    Thank you for being a part of our community!

Manifold identification

J

Jaypee_6680

New member
Joined
May 18, 2019
Location
London
So I have in my possession two turbo manifolds that seem to fit my Garrett T3 turbo.

Any idea which is best?

Part number are:

3514275 (came attached to a B230FT)

1366992 (came as a random spare with the B230FT)

I did a search and couldn’t find anything conclusive.

John

open
 
Last edited:
We'll for a turbo redblock everybody like the later 1990 or newer style flows better turbo manifold. Can't see your pics. Anyway the later better style has studs you nut your turbo on with, the earlier style has bolts and nuts.
 
Then you port the opening for the turbo on the manifold to better match the inlet to the turbo. Now you have even more flow with less heat built up in the manifold which will help avoid cracking. Use a standard T3 gasket as the template to open up the manifold.
 
Use the manifold with no cracks.

The one with the bars between the head ports is better, less warping.

Port match it for more flow.
 
You must log in or register to reply here.
Back
Top