View Single Post
Old 07-13-2018, 12:48 AM   #7
Board Member
sbabbs's Avatar
Join Date: Dec 2006
Location: Rushing Lane, Scappoose, OR

I asked how you are reading the chips in the ECU. How do you do that? Can you tell me that so I don't have to read 10 PDF's.

What is the chip in the regina ECU that you take out of the socket and read the bin from? Or do you have to Jtag it and power it up and read it that way? How do you do it once again? There are only a few ways to read data on chips, which way you doing it? How would you then reprogram it? I suspect there are only surface mount chips in the Regina. Good luck Regina lover. I could help..
1988 245 White slicktop M47 Wagon! 2.5L NA 8v going in.
1990 745 B230FT Getrag JohnV flywheel 240mm clutch 13c A-cam 3.54 G80 548K MILES
1991 740SE B230FT NPR Strut braces IPD bar A cam 550cc EV14's. 3.73 G80 M90 to put in.

Last edited by sbabbs; 07-13-2018 at 12:56 AM..
sbabbs is offline   Reply With Quote