View Single Post
Old 11-12-2020, 06:54 PM   #258
Making Volvo Parts Fit
lookforjoe's Avatar
Join Date: May 2008
Location: Rockland County, NY

So turns out it's not as dire as I imagined - spoke with the machine shop, and he lent me one of the certified flat bar stock they use for final decking. I went over the block with 180 emery liberally lubricated with wd40 (after blocking off all the oil & water ports) and was able to get the ridges gone without any drama, just about 1/2 hour - 45 mins work. Should be able to assemble the motor after work tomorrow, I hope


My XR July2013 - 446AWHP @ 8K rpm Feedback Thread
lookforjoe is offline   Reply With Quote