View Single Post
Old 08-19-2019, 12:27 AM   #25
SEslayer
Dumber than I look.
 
Join Date: Apr 2013
Location: New Zealand
Default

Quote:
Originally Posted by James M View Post
I'm only finding 225mm KA24 clutch disks, is that what your using? I was under the impression the dog-dish was made for 228mm disks.
I have just pulled my B200FT and replaced with a B230FT. In doing so i also decided to upgrade to the yoshifab 235mm package.
I can confirm the original clutch i ran with the setup was to small. it worked, and got me going, but it unevenly wore the flywheel and pressure plate.
it was the cheapest way to get the car going and it does work, its just not ideal.
it lasted me long enough to save the nearly $2000 Nzd i needed for the better setup.
The cheaper alternative that i was going to get was the clutch upgrade that Yoshifab sells, the main reason i diddnt was so in future i can buy shelf stuff for my car locally.
https://yoshifab.com/store/volvo-red...-3-clutch.html
https://yoshifab.com/store/235mm-clu...l-package.html

Once i get this POS no start issue sorted ill upload some more photos and throw some decent miles on the swap to review it properly.
__________________
1992 945 Turbo CD009
1979 244 GLE - the ladys car
1989 745 Turbo -Swapped for a KP61 starlet
1985 360 - Crushed
1990 740 GLE 16V - Crushed
1990 740 Turbo - Crushed
1972 164 - Mid Resto

1992 Nissan GTIR pulsar. - likely my coffin.
SEslayer is offline   Reply With Quote