View Single Post
Old 08-20-2019, 05:03 PM   #21
John V, outside agitator
Board Member
 
John V, outside agitator's Avatar
 
Join Date: Mar 2005
Location: Sleezattle, WA, USA
Default

Quote:
Originally Posted by hiperfauto View Post
The numbers I used assumed you had the VV101 cam. The calculator says to use seat to seat valve timing numbers for best results but the closest I could find were valve events @ .020" lift using this site for reference. That means that dynamic compression is actually a bit lower.



Using the numbers for a VV71 it works out to 8.90:1.

Yep that's my favorite calculator except that everything is in some units made up based on a mythological kings thumb ferfawkssake.....

What's nice with that is you can keep banging in numbers till you get dynamic up to high 9s maybe 10:1---then see whatchoo need for "static" to get that number.
__________________
John Vanlandingham/JVAB Imports
Sleezattle WA, USA

--> CALL (206) 431-9696<----

www.rallyrace.net/jvab

www.rallyanarchy.com

Vive le Prole-le-ralliat

"When a man tells you that he got rich through hard work, ask him: 'Whose?'"
Don Marquis
John V, outside agitator is offline   Reply With Quote