View Single Post
Old 08-29-2019, 02:41 PM   #7
50 shades of beige
blkaplan's Avatar
Join Date: Jul 2002
Location: Rockville, MD

Originally Posted by jjona5 View Post
If you say so. I cut the spacer to the tube in several pieces hoping it would come out easier. Then tried to knock it out and it appeared to be one solid piece of metal. I tried to use the air chisel. When that didn't work(started to mess up the tube) I took a die grinder and they never once came out as a piece. Just shaved down until it was even with the rest of the tube. This was a 93 classic 245 with abs
The swedes know how to weld

With any good weld the part just wont come out as one piece unless you completely remove the weld and even then you need to use a lot of force as the base metal should be fused
Kaplhenke Racing Facebook
Originally Posted by DarkKratoz View Post
The only safe bet is Ben.
blkaplan is offline   Reply With Quote