View Single Post
Old 11-21-2018, 10:53 AM   #15
Sweep
Board Member
 
Join Date: Dec 2014
Location: Peterborough - UK
Default

Quote:
Originally Posted by dl242gt View Post
If that port isn't being used for boost control it should be plugged. If it is going to be used for boost control it goes to the wastegate actuator.

No connection at all is a large air leak causing a loss of measured air and idle roughness.
That's excellent, thanks! I'm on holiday on your side of the pond until December so it'll have to wait.
Sweep is offline   Reply With Quote