View Single Post
Old 12-02-2018, 04:40 PM   #9
culberro
Ronald Culberbone III
 
culberro's Avatar
 
Join Date: Feb 2010
Location: Portland, OR
Default

Quick question: is the pin height the same on both pistons (distance from the center of pin hole to the top of the piston?)
The pistons will work as is, you just need some spacers made for the small end of the rod.
Or get some stock length rods that are crank steered.
__________________
Cult Person. Pissing in your Kool-Aid.
culberro is offline   Reply With Quote