View Single Post
Old 05-17-2017, 02:35 PM   #42
Board Member
84B23F's Avatar
Join Date: Feb 2008
Location: Kansas, USA

Originally Posted by lummert View Post
Here are specs for Bosch 0280150934/945:
I have a grasp of ECU programming parameters, but here is a partial overview.

In the chart, notice the "slope flow rate," and note this tidbit:

NOTE: Testing for these values is done at 3 Bar (43.5psi) using 16B calibration fluid at 90°F (a fluid with similar specific gravity to gasoline, which is widely used in the automotive industry as a “safe” testing fluid closely resembling gasoline.) If you run a different base pressure or a different fuel, you would need to adjust the flow rate in your tuning software accordingly.
84B23F is offline   Reply With Quote