face_the_heat
New member
- Joined
- Nov 25, 2011
- Location
- Ontario's South Coast
So i'm in the process of trying to get the TB running, first time dealing with MS. I have all my sensors reading alright. Except for one the... Trigger. I'm running a dizzy with hall sensor, at first I had 12 v going to my hall and my board assembled for a 12v hall, with input to pin 24. I had a 5 v signal coming from the sensor on the return, whenever the window passed it ground it out so MS captures it on the falling edge ( after being inverted internally ). I had no signal in tuner studio not showing any rpm spikes or input at all.
I figured my Hall is actually a 5v so i did the board conversion to 5v, it now has a 5v ref+ and input to pin 24 also. Still no signal, actually worse off since the hall just read 4.5v at any time in rotation.
What am i doing wrong? Im running outta patience, need to be cruising out of the garage soon.
I figured my Hall is actually a 5v so i did the board conversion to 5v, it now has a 5v ref+ and input to pin 24 also. Still no signal, actually worse off since the hall just read 4.5v at any time in rotation.
What am i doing wrong? Im running outta patience, need to be cruising out of the garage soon.