View Single Post
Old 10-18-2020, 10:47 PM   #2
Murploid1
Board Member
 
Murploid1's Avatar
 
Join Date: Apr 2017
Location: Houston, Texas
Default

I recently also purchased a replacement emblem for my grill. My car is an 82 and I (stupidly) didn’t measure it- 70mm is too big. So, had to order a replacement smaller badge ugh...

Anyhow, I used a trim tool and a pick to pry the old emblem out, it’s glued in place. Persist and it will come out. I plan on using some sort of flexible adhesive to secure it. Just clean all the old adhesive out. Mine is prepped and ready to be glued when it arrives. I was going to use double sided tape but this will not allow it to sit flush.
Murploid1 is offline   Reply With Quote