View Single Post
Old 10-18-2020, 10:53 PM   #3
Frank_Rizzo
Board Member
 
Join Date: Jul 2018
Default

Quote:
Originally Posted by Murploid1 View Post
I recently also purchased a replacement emblem for my grill. My car is an 82 and I (stupidly) didnít measure it- 70mm is too big. So, had to order a replacement smaller badge ugh...

Anyhow, I used a trim tool and a pick to pry the old emblem out, itís glued in place. Persist and it will come out. I plan on using some sort of flexible adhesive to secure it. Just clean all the old adhesive out. Mine is prepped and ready to be glued when it arrives. I was going to use double sided tape but this will not allow it to sit flush.
Wait, I think mine was 65mm, I must have misspoken. 70mm is for 1986-1993, I believe.

Anyway, that gets at the crux of the issue. Exactly how did you get the old emblem out in the first place? It's encased in a space covered by acrylic in the front, metal in the back, affixed to the grille.
Frank_Rizzo is offline   Reply With Quote