View Single Post
Old 10-16-2016, 03:08 PM   #63
Board Member
Broke4speed's Avatar
Join Date: Oct 2009
Location: Marionville, Ontario, Canada

Todays tasks: removed the driveshaft (have a 'big' one to go in), unbolted the downpipe, removed the transmission crossmember, disconnected the speedo cable (GPS from now on), and unbolted the engine mounts.

Supplemental tasks: cursing and swearing due to arms and face covered in Krown undercoating.

Pleasant surprise: my 84 has the second set of crossmember holes already in place, so I can mount the 71L without any fuss .
1984 244/ AQ140A / M46

Last edited by Broke4speed; 10-16-2016 at 03:16 PM..
Broke4speed is online now   Reply With Quote