View Single Post
Old 11-30-2016, 11:06 AM   #77
Board Member
Broke4speed's Avatar
Join Date: Oct 2009
Location: Marionville, Ontario, Canada

Added a second output to my MS1 v2.2 last night, so now I can control the two-speed fan properly. I also encountered the 'heater pipe resting quite firmly against the 90+ manifold' issue, since I'm using the B21A pipe, and it does not have the dip in it that the turbo ones do. I tried to pull the one from the lone turbo 940 at the yard, but it was rotten to the core. I broke down and ordered one from IPD, even though I'll have to block off the port that goes to the water-cooled oil cooler, and make two mounting tabs. My water pump has the bolt on the top, and the late pipe I ordered bolts on the bottom. No biggie...I love my welder .
1984 244/ AQ140A / M46
Broke4speed is offline   Reply With Quote