Thread: 1990 240 Turbo
View Single Post
Old 05-08-2020, 01:24 AM   #51
Board Member
Finnish240's Avatar
Join Date: May 2011
Location: Finland

New battery, fuel- and oil filter with fresh oil are in. Car starts like it should and works fine. Fuel filter change was such a pain in the ass because banjo fittings started to leak, and leak wouldn't stop until I did put old copper rings back. New copper rings from my 50 piece sortment were too wide from touching surface. Next task was to install new wideband Bosch lsu 4.9 sensor. Old sensor stopped working last fall and Innovate showed only E8 fault code. Some times 22.4 was shown but it couldn't read any afr's right. Common issue with Innovate mtx-l.

Works and shows afr's how it should
Volvo 240 GL - not so low, but yes.... it is slow
Finnish240 is offline   Reply With Quote