View Single Post
Old 08-05-2020, 11:04 PM   #161
snailmale
Board Member
 
Join Date: Sep 2018
Default

Just my luck: One of the water pump studs backed out just enough that I couldn't squeeze a 6-point or 12-point wrench or even a rotary cut-off wheel onto the nut. All attempts to use a open-end or locking pliers succeeded in deforming the nut further.

I took a little 6" hacksaw and began hacking off enough of the stud so I could squeeze a wrench over it. It took two days (I found out I bought the wrong blade size after Home Depot closed for the day) and two blades, but I successfully hacked off about 1/8" off the end of the stud, which was enough clearance that I could fit a 6-point wrench onto the deformed mess of the hex nut.




Seriously, having a 6-point wrench made removing the nuts so stupidly easy. Worth the $7 I paid. I wouldn't bother with anything else.


Boy, I sure made a mess of this one. Will be ordering new ones this weekend when I go down to LA for a trip to McMaster-Carr and a date.



I also repurposed a bit of old radiator hose to make this neat little blade guard based on something I read in Popular Mechanics. I'll probably regret hacking up this one since none of the local shops stocked it and I had to order the new one off Amazon.



In other news I've slathered enough Naval Jelly on the battery tray area to clean up just a bit of the corrosion. I'll keep working at it, but I'll definitely have whoever handles the body work replace that when they repaint the engine bay.



Next step: figuring out how to release tension on the drive belts.
__________________
KEEP THE VOLVOS CIRCULATING!

- '83 245 Turbo
snailmale is offline   Reply With Quote