View Single Post
Old 09-01-2020, 01:40 AM   #86
pat244ti
Moderator
 
pat244ti's Avatar
 
Join Date: Dec 2002
Location: Santa Cruz CA
Default

Right now it has 1/4 of an inch, but the engine is not in it's final spot yet and once the manifold gets a little reworked it should have 3/4 to an inch.

https://yoshifab.com/store/pre-folde...ke-plenum.html

Slapping that on further down the b21f runners would definitely help with clearance issues, seen it done a few times. It would be cool if someone with a KL racing intake on their car could measure from the crank center to the edge of the intake.
__________________
- Patrick
83 244ti - rally
73 1800es - resto mod cruiser
83 244ti - road race
79 262c - road race in the works
08 c30 T5 - daily recce car - M66, Lifted 1.5'', 215/65/16 Falken All Terrains on Method MR502's, iPD skid plate
97 Dodge Dakota 5.2 4x4
70 Ford F100 2WD 351M/C6
pat244ti is offline   Reply With Quote