Thread: 1988 740 16v?
View Single Post
Old 09-05-2020, 12:26 AM   #33
Board Member
Finnish240's Avatar
Join Date: May 2011
Location: Finland

Originally Posted by Sjeng View Post
They are very good units, from what I have read. There are a couple of variants, compressor size ranges from 50 to 54mm inducer, and turbine exducer varies between 56 and 65mm. Even the 65mm turbine is said to spool very well. I would certainly try it if I were you.

I have a couple of different turbo's which I might try after this. HX40 16cm with 56mm inducer. Should deliver a lot of power, wonder how it spools on this engine.
Hx40 is a common used unit in Finland. S200sxe turbos have "lots of" variants with their turbine housings, it would be nice to have info if the turbine housings would fit to these work machine units
Volvo 240 GL - not so low, but yes.... it is slow
Finnish240 is offline   Reply With Quote