AlexStromberg
New member
- Joined
- Apr 9, 2017
- Location
- Sweden, Eskilstuna
I've tried looking on ARP's website but no luck there, only for the 5-cyl. So is there any other manufacture who makes strong bolts and such for the redblocks?
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
I think yoshifab.com had them last I looked..
You can always call the supplier or arp with the thread and bolt dimensions and they will say yes or no.
I put the 12.9 grade in my engine, according to the given tensile strength and shear force, the 12.9 grade bolts are very close to the ARP studs in strength.
I bought the 12.9 grade allen bolts and 10.9 grade shims, for around 1/10 of the price of ARP studs in the States, and that's without shipping and customs clearance on the studs
does the B234F engine use the same studs?
Something to keep in mind as well. The ARP stuff is fine thread at the top, a touch better for more even clamping force. That's from a couple different sources.
does the B234F engine use the same studs?
Did you use the old school torque procedure that requires re torquing them after you run it?