View Single Post
Old 07-21-2006, 06:25 AM   #45

Originally Posted by davidmacq
I'm gonna order the adjustable fpr. Should make it easy to install.

What about fittings for fuel pressure guage. Can it just be hooked up to the test valve on the fuel rail, and left or removed as needed?
The test valve on the rail is a shrader valve (the same as used on your tires), so if you can find a gauge with that type of connection or make an adapter for it, then it would probably work fine.

DonŽt connect/disconnect the gauge while the car is running. YouŽll never know how good the valve will seal.

Measure the base fuel pressure with the vacuum hose disconnected.
  Reply With Quote