Onefastpig
New member
- Joined
- May 16, 2007
- Location
- New Jersey
I would like some input on these wheels for sale locally. How would they fit and look on the 242? With adaptors and spacers of course.
Seller says they have 5 inch backspacing, Dont know how to convert that to mm offset. Bolt pattern is described as 4-3/4. Fits most GM cars.
Center cap says "ARE"
https://us.letgo.com/en/i/16x8-gm-rims_d40e5488-2378-4cb0-bdeb-c4788bc1869d
Also have these local.
http://longisland.craigslist.org/wto/5831337090.html
I would like to go wider on the rim than the mercury wheel though.
And of course the trusty ol Salad Shooters.
These are off a 1987 dont know if they have a staggerd width. Seller says they "Match" and came off a 1987
http://longisland.craigslist.org/wto/5880096033.html
Any input would be great. Thanks TB
Looks like those first wheels are 16x8 with a 38mm offset.
The 1987 Salad Shooters should be a 16x8.5 square setup with a 32mm offset. I ran 27mm and 42mm spacers of my 242 with 205/50 Federal 595s which tend to run a little wide
If you have any more questions, send me a PM