poulrais
Well-known member
- Joined
- Sep 8, 2006
- Location
- Quebec, CAN
1990 740... Been wanting to install big brakes for awhile and this has become imperative with the forged B6284t swap I'm working on. Since there is next to nothing offered for the 740/940 model RogerDee made me these adaptors after I bugged him for like a year!
Now I just need him to make me some 1/2 inch thick hub-centric plate that will go behind the disks to move them forward and clear the adapters and line up to the center of the calipers.
I made myself some 9/16th spacers with some tubing to try these on today and take some pics. I'll probably be using 330mm S60r rotors like the ones in the pictures. I'll also check with Wilwood for for a hat/disk combo if I'm not satisfied with the S60r rotors.
I will also probably have to upgrade my brake's master cylinder to have sufficient brake pedal fell and travel.
Now I just need him to make me some 1/2 inch thick hub-centric plate that will go behind the disks to move them forward and clear the adapters and line up to the center of the calipers.
I made myself some 9/16th spacers with some tubing to try these on today and take some pics. I'll probably be using 330mm S60r rotors like the ones in the pictures. I'll also check with Wilwood for for a hat/disk combo if I'm not satisfied with the S60r rotors.
I will also probably have to upgrade my brake's master cylinder to have sufficient brake pedal fell and travel.