View Single Post
Old 07-11-2018, 11:39 AM   #5
nel621
Board Member
 
Join Date: Apr 2009
Default

You will need the door armrest with the switches. You can keep your original door panels but you will need to plug a small hole where the window crank was. Volvo used to sell a plug just for that but you can make something up. If you keep your door panels you will need to make a small oval hole in the panel so the switch plugs can be pulled through. Cut the panel carefully and use this scrap piec to make the plug/cover. It will now have the same fabric on it! This is what I did to an 87 240 that I once had. Find rear headrests and give the car a "newer" look.
nel621 is offline   Reply With Quote