t8fanning
8v are still cool, right?
- Joined
- Oct 10, 2010
- Location
- Vancouver, WA
I am using MS3Pro and have two blend curves based on my flex. One is the basic blend curve, and the second is a boost blend curve that goes between two target tables. At 60% flex, my boost blend curve is at 100% table 2, so my boost setting should be commanded only by table 2. However, when I input a target of 305 kpa to table 2, my boost duty table is looking at cells just above 275 kpa. Only when I input a target of something like 33 kpa do I get a boost duty for 305 kpa. My main flex blend curve does not dictate 100% tables 2 at 60% flex. Does this table affect the boost control, or is there another multiplier or blend function I could be missing?