View Single Post
Old 09-24-2016, 08:17 AM   #157
lookforjoe
Board Member
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default

Slight problem







thankfully bores, pistons & head are all OK. I leak tested the piston/rings/bores - 16inHg on each, consistent & even.




I need to revise the timing map before I drive it again.

This is the Fiat spec range




What I have, using the NA EZK116




I'll load the Turbo map for starters, and maybe take some more off that.





Since I don't know what actual values I get in use, and where the load range falls on my 1600 vs 2300 - I may be , must be getting way to much timing in the part load range. All the fire rings are hammered around the bore, just those two pushed out.

EDIT: I'll have to try BeePee's LH datalogger mod (I'm using the 951 ECU)....

Dallara body work coming along - 960 lip added to the front spoiler & C30 rocker panel for the side front to rear integration



__________________

My XR July2013 - 446AWHP @ 8K rpm

Last edited by lookforjoe; 06-16-2018 at 09:00 PM..
lookforjoe is offline   Reply With Quote