View Single Post
Old 01-01-2017, 10:57 PM   #160
lookforjoe
Board Member
 
lookforjoe's Avatar
 
Join Date: May 2008
Location: Rockland County, NY
Default

Got the BTI board.

Installed in my box. Using pins 14,15 for signal output to power stage



Made a heat sink for the power stage, and standoff for the Bosch coil pack







replacing the cut wires with Volvo style connectors and wiring



Adaptor harness pretty much complete. Just have to trim to length & feed signal wires into cabin

__________________

My XR July2013 - 446AWHP @ 8K rpm

Last edited by lookforjoe; 05-31-2018 at 09:35 PM..
lookforjoe is offline   Reply With Quote