Thread: Won't idle
View Single Post
Old 12-20-2021, 05:31 PM   #9
CAPT_BLOTTO
#Crush It
 
CAPT_BLOTTO's Avatar
 
Join Date: Jul 2005
Location: Kansas City
Default

Well I've made some small progress. Rewired all the sensors just to the sensor ground input. Having the grounds on the intake manifold was causing some sort of issue with the TPS.

I got it to run and even idle some. Now I'm seeing an issue with my AEM wideband. It's showing very lean on the MS and occasionally spikes to rich. The gauge however doesn't show that at all. It's showing full rich all the time. It's wired the white analog output from the AEM to the pink on MS. Is there anything I would need to change on EGO control? It's set to single wideband local input. I assume that's the pink input wire for MS.
Or do I need to ground the AEM to the same sensor ground?
__________________
Hello My Glorious!

Junkyard Parts request thread!
Mesquite FB page! Constant updates!

Da Yellow Sold | $800 245 | 77 244
CAPT_BLOTTO is offline   Reply With Quote