CaliMeatWagon
Cause of Head Scratching
- Joined
- Jun 29, 2011
- Location
- Stockton, California
On a 16v head how far can you shave it to increase the compression ratio.
How far can it be shave with out having to increase the depth of the valve reliefs?
Also I'm curious to same question with an 8v head.
This is on a 1991 745 B230F
Thank you for any advice/experience you have to offer regarding my question.
How far can it be shave with out having to increase the depth of the valve reliefs?
Also I'm curious to same question with an 8v head.
This is on a 1991 745 B230F
Thank you for any advice/experience you have to offer regarding my question.