60-2 wheel + distributor (not waste-spark settings)

AnthonyH · 06-15-2007, 04:05 PM

hello all,
Today I attempted to Megasquirt my friend's car, everything is about exactly the same as my car, except that I'm running wastespark.

So I loaded my MSQ in the box, tried it on my car first, everything works perfect, but then I change the Spark B back to accel-light. And deleted the Triger B stuff. (He wants to run a distributor with ONE coil.) And I'm getting the engine to start on only 2cyls.

It's almost like I'm triggering at 360degrees instead of 180. What to do???

Edit: If anyone has an MSQ to share would be greatly appreciated. (It's a simple 230ft, vx3, rb25 turbo.)

Cheers!

gielamonster · 06-18-2007, 10:12 AM

Anthony, sorry I can't help but any chance you could post up your 60-2 waste spark .msq? I'm struggling with my current project and could use some sanity checks as far as settings go. If you have some time, could you take a gander at my threads on msefi and msextra.com?

http://www.msextra.com/viewtopic.php?t=24926
http://www.msefi.com/viewtopic.php?t=27052

06-15-2007, 04:05 PM	#1
AnthonyH Board Member Join Date: Nov 2004 Location: Bangkok, Thailand	60-2 wheel + distributor (not waste-spark settings) hello all, Today I attempted to Megasquirt my friend's car, everything is about exactly the same as my car, except that I'm running wastespark. So I loaded my MSQ in the box, tried it on my car first, everything works perfect, but then I change the Spark B back to accel-light. And deleted the Triger B stuff. (He wants to run a distributor with ONE coil.) And I'm getting the engine to start on only 2cyls. It's almost like I'm triggering at 360degrees instead of 180. What to do??? Edit: If anyone has an MSQ to share would be greatly appreciated. (It's a simple 230ft, vx3, rb25 turbo.) Cheers! __________________ Too many old volvos... 122S '58,'59 &'63 -4A-GE, B20f, B5234t 144S '72 - B254+t04s 164 '70- B6244+hx40 244GLT '84, b230+t gt37 940estate, 1uz+T51rKAI, Koni, IPD sways, 360mm 6pot+355mm 4pot Porsche calipers, 18" VST Monoblocks Last edited by AnthonyH; 06-15-2007 at 04:23 PM..

06-18-2007, 10:12 AM	#2
gielamonster Board Member Join Date: Oct 2005 Location: Hermosa Beach, CA	Anthony, sorry I can't help but any chance you could post up your 60-2 waste spark .msq? I'm struggling with my current project and could use some sanity checks as far as settings go. If you have some time, could you take a gander at my threads on msefi and msextra.com? http://www.msextra.com/viewtopic.php?t=24926 http://www.msefi.com/viewtopic.php?t=27052 __________________ '85 744ti LeMons racer!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode