VDO gauges and stock 240 turbo wiring...

BryantTF242 · 07-05-2012, 07:32 PM

So I had a question about the VDO gauges.

All the small gauges (5 bar oil pressure, and 10-16 volt) in my 240 turbo are all VDO, would the aftermarket VDO gauge work with the sender for the oil pressure gauge and will the volt meter be a direct plug in and read accurately? if not will the sender for the new one fit where the stock one is? I got a VDO boost gauge a while back and I'd like the rest of the worn out looking ones to match the new one.

Thanks in advance

Volt gauge
http://www.summitracing.com/parts/VDO-332103/

Oil Pressure
http://www.summitracing.com/parts/VDO-350104/
Pressure sender
http://www.summitracing.com/parts/VDO-360006/

Lord_Athlon · 07-05-2012, 07:34 PM

miguel.760ti · 07-05-2012, 07:35 PM

Yes, the aftermarket vdo gauges are plug & play

BryantTF242 · 07-05-2012, 07:35 PM

So i wont be needing the sender? the one in the car currently will work just fine for the oil pressure?

Lord_Athlon · 07-05-2012, 07:40 PM

Vdo gauges are Vdo gauges. If the stock ones work, cockpit or vision gauges will work as replacements 98% of the time. I have cockpit gauges in all my cars

miguel.760ti · 07-05-2012, 07:40 PM

BryantTF242 · 07-05-2012, 07:46 PM

awesome, thanks.

07-05-2012, 07:32 PM	#1
BryantTF242 Board Member Join Date: Jun 2011 Location: San Jose, California	VDO gauges and stock 240 turbo wiring... So I had a question about the VDO gauges. All the small gauges (5 bar oil pressure, and 10-16 volt) in my 240 turbo are all VDO, would the aftermarket VDO gauge work with the sender for the oil pressure gauge and will the volt meter be a direct plug in and read accurately? if not will the sender for the new one fit where the stock one is? I got a VDO boost gauge a while back and I'd like the rest of the worn out looking ones to match the new one. Thanks in advance Volt gauge http://www.summitracing.com/parts/VDO-332103/ Oil Pressure http://www.summitracing.com/parts/VDO-350104/ Pressure sender http://www.summitracing.com/parts/VDO-360006/ __________________ 1982 242 Turbo - The Fun One 1989 244DL - the DD

07-05-2012, 07:40 PM	#6
miguel.760ti Board Member Join Date: Nov 2008 Location: Mesa, AZ	Si.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-05-2012, 07:35 PM	#4
BryantTF242 Board Member Join Date: Jun 2011 Location: San Jose, California	So i wont be needing the sender? the one in the car currently will work just fine for the oil pressure?

07-05-2012, 07:40 PM	#5
Lord_Athlon Ballsdeep in wire. Join Date: May 2003 Location: Tucson.	Vdo gauges are Vdo gauges. If the stock ones work, cockpit or vision gauges will work as replacements 98% of the time. I have cockpit gauges in all my cars

07-05-2012, 07:46 PM	#7
BryantTF242 Board Member Join Date: Jun 2011 Location: San Jose, California	awesome, thanks.