NPR Intercooler fitment

gottarollwithit · 07-04-2012, 09:12 PM

So i'm contemplating installing my NPR intercooler. My car is an 88' 740ti.

What do you guys do for mounting/securing the bottom part of the intercooler?

I want to keep the stock airbox setup. The thickness and width of the intercooler work fine, but it is a few inches too short. The bottom of the intercooler is a few inches away from the lower radiator support brackets. What do you guys do to mount the intercooler onto these brackets? Any of you guys fabricate a big rubber riser or bushing to fit into the brackets?

I saw Simon's NPR intercooler installation vid and he uses a piece of wood. I'm trying for a long term solution here and wood will eventually rot/compress/degrade. Any ideas?

Coupe' de Grace · 07-04-2012, 09:15 PM

Coupe' de Grace · 07-04-2012, 09:28 PM

gottarollwithit · 07-05-2012, 12:48 AM

Is that...styrofoam???
Doesn't that stuff compress a little bit and rub away with friction?

2fast242gt · 07-05-2012, 01:19 AM

you could use rubber, pvc aluminum be creative!

gottarollwithit · 07-05-2012, 01:25 AM

I was going to use rubber, but where the heck do ya get a block of rubber that big! I figured i could carve a couple pieces of rubber to work as a big intercooler mount, but just couldn't find a big rubber block.

I considered and aluminum bracket, but that intercooler is probably going to jump/vibe/shake around and eventually the alu mount will gall and damage the intercooler.

gsellstr · 07-05-2012, 02:48 AM

I've actually had wood on the bottom of mine for.....counts....4 years or so? Never really had any issue thus far.

DET17 · 07-05-2012, 06:38 AM

Quote:

Originally Posted by gsellstr

I've actually had wood on the bottom of mine for.....counts....4 years or so? Never really had any issue thus far.

Worried about wood? Use pressure treated deck planks....think they are about 3/4 thick. Otherwise, fab some supports out of mild steel and weld/bolt them in.

swiftjustice44 · 07-05-2012, 07:32 AM

Styrofoam works well. There is nearly no downward pressure; it's held by the pipe connectors. Still, I opted to build a sheet metal ledge.

Coupe' de Grace · 07-05-2012, 08:24 AM

Quote:

Originally Posted by gottarollwithit

Is that...styrofoam???
Doesn't that stuff compress a little bit and rub away with friction?

what do you think cars are made out of these days

dalek · 07-05-2012, 09:06 PM

Quote:

Originally Posted by Coupe' de Grace

what do you think cars are made out of these days

Papier-Mache?

Lando · 07-05-2012, 10:38 PM

Quote:

Originally Posted by gottarollwithit

I was going to use rubber, but where the heck do ya get a block of rubber that big! I figured i could carve a couple pieces of rubber to work as a big intercooler mount, but just couldn't find a big rubber block.

I considered and aluminum bracket, but that intercooler is probably going to jump/vibe/shake around and eventually the alu mount will gall and damage the intercooler.

Rubber lift pads cut to fit?

2fast242gt · 07-05-2012, 10:46 PM

Rubber wheel chocks cut them up. Be creative.

odinthewanderer · 07-05-2012, 11:07 PM

oh i know, bricks?

cute right?

Coupe' de Grace · 07-06-2012, 09:44 AM

may i suggest unistrut™? i was going to use that next or have nathan make me something permanent

Boris740 · 07-06-2012, 08:04 PM

Cedar worked for me. Light and it doesn't rot.

holtzboy · 07-07-2012, 02:43 AM

I cut up used radiator hoses and stuffed them underneath, just added a little barrier so it wasn't metal on metal contact. Like others said the hoses/clamps held it in place.

07-04-2012, 09:12 PM	#1
gottarollwithit Cooks with motor oil Join Date: Aug 2008 Location: nut Sac, Cali	NPR Intercooler fitment So i'm contemplating installing my NPR intercooler. My car is an 88' 740ti. What do you guys do for mounting/securing the bottom part of the intercooler? I want to keep the stock airbox setup. The thickness and width of the intercooler work fine, but it is a few inches too short. The bottom of the intercooler is a few inches away from the lower radiator support brackets. What do you guys do to mount the intercooler onto these brackets? Any of you guys fabricate a big rubber riser or bushing to fit into the brackets? I saw Simon's NPR intercooler installation vid and he uses a piece of wood. I'm trying for a long term solution here and wood will eventually rot/compress/degrade. Any ideas? __________________ 1988 740 turbo wagon/squishmobile!

07-05-2012, 01:19 AM	#5
2fast242gt cheeseland highschool kid Join Date: Nov 2005 Location: appleton WI	you could use rubber, pvc aluminum be creative! __________________ 1980 241gt 6.0 lq4 swaped

07-05-2012, 02:48 AM	#7
gsellstr Vintage anti-ricer Join Date: Oct 2004 Location: Somewhere in a northern California smog bank	I've actually had wood on the bottom of mine for.....counts....4 years or so? Never really had any issue thus far. __________________ RIP Doug "Mr. Doug" Williams, 4/15/2009 74 144 B20 http://forums.turbobricks.com/showthread.php?t=224983 90 745Ti, AW71L, IPD bars/springs, Koni SA's, JVAB B230FT, Big Valved 531 head, IPD Turbo cam, GT2871R @ 18psi, TLAO chips, E85, NPR, 3.5" DP, 3" DP-back, MSD, TruTrac, Wilwood BBK If you need Superpro bushings PM me or check the current GB, running until 3/31/13 at http://forums.turbobricks.com/showthread.php?p=4493644).

07-05-2012, 11:07 PM	#14
odinthewanderer Board Member Join Date: Aug 2009 Location: north east	oh i know, bricks? cute right? __________________ ask my what kind of stupid i am today? PM ME IF INTERESTED IN PURCHASING R-SPORT GAUGE PACK. i neeeeeed $$$$ 92 745tic (driver) 92 245 modified (currently parting) 77 244 dl (almost done)

07-06-2012, 08:04 PM	#16
Boris740 Broad Member Join Date: Nov 2002 Location: Aurora, Ontario	Cedar worked for me. Light and it doesn't rot. __________________ Got knock? Got Megasquirt? Check out Knocksense knock indicator and KnocksenseMS indicating Megasquirt interface.http://www.viatrack.ca/

07-04-2012, 09:28 PM	#3
Coupe' de Grace Slowest in the West™ Join Date: Mar 2005 Location: metropolitan los angeles

07-05-2012, 12:48 AM	#4
gottarollwithit Cooks with motor oil Join Date: Aug 2008 Location: nut Sac, Cali	Is that...styrofoam??? Doesn't that stuff compress a little bit and rub away with friction?

07-05-2012, 01:25 AM	#6
gottarollwithit Cooks with motor oil Join Date: Aug 2008 Location: nut Sac, Cali	I was going to use rubber, but where the heck do ya get a block of rubber that big! I figured i could carve a couple pieces of rubber to work as a big intercooler mount, but just couldn't find a big rubber block. I considered and aluminum bracket, but that intercooler is probably going to jump/vibe/shake around and eventually the alu mount will gall and damage the intercooler.

07-05-2012, 07:32 AM	#9
swiftjustice44 Marshmallows anyone? Join Date: Feb 2007 Location: DALLAS	Styrofoam works well. There is nearly no downward pressure; it's held by the pipe connectors. Still, I opted to build a sheet metal ledge.

07-05-2012, 10:46 PM	#13
2fast242gt cheeseland highschool kid Join Date: Nov 2005 Location: appleton WI	Rubber wheel chocks cut them up. Be creative.

07-06-2012, 09:44 AM	#15
Coupe' de Grace Slowest in the West™ Join Date: Mar 2005 Location: metropolitan los angeles	may i suggest unistrut™? i was going to use that next or have nathan make me something permanent

07-07-2012, 02:43 AM	#17
holtzboy Converted to Washingtonia Join Date: Mar 2004 Location: Vancouver, WA	I cut up used radiator hoses and stuffed them underneath, just added a little barrier so it wasn't metal on metal contact. Like others said the hoses/clamps held it in place. __________________ -86 244DL- 1st car & Owned for 10 years, 25mm sways, iPd springs/fronts cut 1 coil, HDs, 2.25" exhaust, b-cam, EZK 117K, M47 swap, 100a intake side alt, No PS/AC -79 242DL- B21FT, Getrag 265, 405 head shaved 0.30", B Cam, iPd gear adv 6°, 60/63 turbo, 3" exhaust, NPR, Bilstein HDs, Hydras My feedback thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode