Funkee
Active member
- Joined
- Feb 19, 2010
- Location
- Netherlands
Have it up for sale for €250, can go for a little less.
Hello Guest, welcome to the initial stages of our new platform!
You can find some additional information about where we are in the process of migrating the board and setting up our new software here
Thank you for being a part of our community!
Have it up for sale for ?250, can go for a little less.
Just gonna scrap it I think
Nooooo! Also, are you sure it's not something simple, like the transmission cooler leaking into the radiator, or something?
I’ll let you have my engine for 150 with your cylinder head (or complete engine) in return if you like.
Still a **** load of work, I know
No, bare block. Oil pan/pickup stick, crank sensor (not cam), coils, intake, pretty much everything that's bolted on is off. Exhaust, water pump, timing belt, and crank ventilation is still on I believe but really that's it.
I can take some pictures next week if you like.
It had a M90 so no flex plate. Sold the flywheel. But it's keyed so yours would bolt right on without timing issues.
You would need 2 O-rings for the oil pan (would recommend), Volvo chemical seal or Loctite 518, intake gasket and the rest would be pretty much bolting parts over from one to the other.
Would kind of hate to see it going for rodeo man.. I understand the thing and it's only a fricking car but theres TONS of them around here, really sheds full of grandpa series waiting to be destroyed. Luckily I saved a flathood and good fenders from it.
no idea where to begin
Hold on op, you say you traded a SHELL of an 780 for a running and functioning wagon!?!
If that's the case, you have no idea how many clean, and complete 780's are in my area. Seems like the only place suitable for them is the trash (as that's where most of them end up!)
This one's been for sale for AGES! I'm sure the seller is VERY negotiable!
https://vancouver.craigslist.ca/bnc/cto/d/1988-volvo-bertone-780-coupe/6437450665.html