dbarton
Dejected by Volvo Corp.
- Joined
- Nov 17, 2002
- Location
- Prosper, TX
RECLOCKING the Delco (CS130D version) Mechman.
Remove the front pulley. Mine was a 22 mm nut I spun off with an impact wrench.
Then remove these three nuts (8 mm socket). Remove the output post nut also.
That back plastic cover will then lift off. If it's tight or hanging up on the studs, give it some force.
.
Remove the front pulley. Mine was a 22 mm nut I spun off with an impact wrench.
Then remove these three nuts (8 mm socket). Remove the output post nut also.
That back plastic cover will then lift off. If it's tight or hanging up on the studs, give it some force.
.
Attachments
Last edited: