Volvo 240 Turbo oil cooler hard line thread to AN10

I run 8AN fittings and line on mine with a 240 cooler and the oil filter relocated. The “restriction” is not in the lines but rather the ID of the fittings/hose ends. I’m not convinced it’s really a restriction though.

AN10 fittings soldered

My browser just crashed just before I was about to hit post, so here's a quick update:
I went to a Hydraulic shop that recommended me to get it soldered instead of using a bunch of adapters. I got it soldered locally at a plumbing company for cheap. The 12 mm hardline was inserted a couple of mm in a steel AN10 weld bung and soldered.



Full story with more photos here:
http://nattvard.com/242/240-turbo-oil-cooler-hardline-conversion-to-an10/

AndrewNance said:

I bought the adapters from pegasus and they work great. A little spendy though.

Click to expand...

Ditto.....worked a treat.